DELTA TT
DELTA TT di LimaCorporate è una coppa acetabolare non cementata emisferica realizzata in Titanio Trabecolare mediante il processo di produzione additiva. Esempio rivoluzionario di tecnologia applicata all’ortopedia, unisce le peculiarità del sistema DELTA alla struttura in Titanio Trabecolare.
Non tutti i prodotti sono disponibili e registrati in tutti i mercati. Per maggiori informazioni contatti il suo Rappresentante LimaCorporate locale
Benefici
01
Superficie di integrazione in Titanio Trabecolare (TT)
02
Profilo completamente emisferico
03
Opzioni di supporto all’avanguardia tra cui DELTA Dual Mobility
Vista 3D
Immagini
Descrizione
La coppa DELTA TT rappresenta l’ultima frontiera in termini di tecnologia applicata all’ortopedia in quanto unisce le peculiarità del sistema DELTA alla struttura in Titanio Trabecolare (TT).
Il Titanio Trabecolare (TT) garantisce la stabilità primaria e l’integrazione ossea [2,3,4,5]. Le viti ossee opzionali possono essere utilizzate per supportare la stabilità nei casi di insufficienza ossea [2]. L’intero profilo emisferico con un press-fit di 1 mm garantisce uno stretto contatto iniziale con l’osso nativo vitale [2,4].
La tecnologia all'avanguardia di LimaCorporate presentano un componente unico in lega di titanio con continuità tra nucleo e struttura porosa esterna, che replica la struttura ossea in modo da ottimizzare la resistenza meccanica [6,7]. Le coppe DELTA offrono uno stretto contatto tra l’osso e il Titanio Trabecolare (TT) contribuendo a ottenere una stabilità primaria che getta le basi per la fissazione secondaria [4]. La sua macrorugosità supporta l’elevata frizione con l’osso al fine di massimizzare la stabilità primaria che favorisce l’integrazione ossea [11]. La microrugosità della coppa favorisce l'adesione, la proliferazione e la differenziazione delle cellule osteogeniche da cui dipende l'ancoraggio [12].
Dal 1978 LimaCorporate adotta un accoppiamento conico tra inserti e coppe al fine di ottenere un accoppiamento più stabile con un angolo di circa 20º per un sistema autobloccante [13]. L'esclusiva tecnologia del peg polare facilita il corretto inserimento degli inserti nelle coppe acetabolari per il corretto orientamento e l’autobloccaggio. La linea include gli inserti BIOLOX® delta, xLima, LimaVit™ e DELTA dual mobility.
Il Titanio Trabecolare (TT) offre un’impalcatura per la colonizzazione delle cellule e la vascolarizzazione del tessuto osseo. Una porosità e una dimensione dei pori ottimali promuovono una vascolarizzazione e una mineralizzazione maggiori, favorendo la formazione di nuovo tessuto osseo [14,15]. Le cellule staminali [hASCs] cresciute sulle impalcature in Titanio Trabecolare (TT) hanno dimostrato di aderire, proliferare e differenziarsi in osteoblasti, anche in assenza di fattori osteogenici [16, 17]. L'analisi istomorfometrica in un modello di pecora in cui è stato confrontato il Titanio Trabecolare (TT) con i rivestimenti tradizionali ha dimostrato che il Titanio Trabecolare (TT) favorisce l’osteogenesi diretta con l’elevata osteointegrazione [18]. Il Titanio Trabecolare (TT) fornisce l’87% di integrazione ossea nell’osso corticale e il 68% nella spongiosa [18].
Vedi bibliografia
BIBLIOGRAFIA
[1] Ashby MF, Evans A., Fleck NA, Gibson LJ, Hutchinson JW, Wadley HNG. Metal foams: a design guide. Woburn (MA, USA): Butterworth-Heinemann; 2000.
[2] Bistolfi A, Ravera L, Graziano E, Collo G, Malino D, Giordano A, Massazza G. A Trabecular Titanium™ cup for total hip arthroplasty: a preliminary clinical and radiographic report. Minerva Ortop Traumatol. 2014 Apr;65(2):199-205.
[3] Massari L, Bistolfi A, Grillo PP, Borré A, Gigliofiorito G, Pari C, Francescotto A, Tosco P, Deledda D, Ravera L, Causero A. Periacetabular Bone Densitometry After Total Hip Arthroplasty with Highly Porous Titanium Cups: A Two-Year Follow-Up
Prospective Study. Hip Int. 2017;27(6):551-7.
[4] Perticarini L, Zanon G, Rossi SM, Benazzo FM. Clinical and radiographic outcomes of a trabecular titanium™ acetabular component in hip arthroplasty: results at minimum 5 years follow-up. BMC Musculoskelet Disord. 2015 Dec 3;16:375.
[5] Shultz TR, Blaha JD, Gruen TA, Norman TL. Cortical bone viscoelasticity and fixation strength of press-fit femoral stems: finite element model.J Biomech Eng. 2006;128(1):7-12.
[6] Medlin DJ, Scrafton J, Shetty R. Metallurgical attachment of a porous tantalum foam to a titanium substrate for orthopaedic applications. Journal of ASTM International. 2005;2(10):30-9.
[7] Marin E, Fusi S, Pressacco M, Paussa L, Fedrizzi L. Characterization of cellular solids in Ti6Al4V for orthopaedic implant applications: Trabecular titanium. J Mech Behav Biomed Mater. 2010;3(5):373–81.
[8] Ding M, Dalastra M, Danielsen CC, Kabel J, Hvid I, Linde F. Age variations in the properties of human tibial trabecular bone. J Bone Joint Surg Br. 1997;79-B(6):995-1002.
[9] William D. Callister Jr. Materials Science and Engineering an introduction. 6th Edition. Hoboken (NJ, USA): Wiley; 2002.
[10] MatWeb. Material Property Data [Internet]. Blacksburg (VA, USA): MatWeb LLC; [cited 2014 May 14th]. Available from: www.matweb.com.
[11] Marin E, Fedrizzi L, Regis M, Pressacco M, Zagra L, Fusi S. Stability Enhancement Of Prosthetic Implants: Friction Analysis Of Trabecular Titanium. Hip Int. 2012;403:427-428.
[12] Mour M, Das D, Winkler T, Hoenig E, Mielke G, Morlock MM, Schilling AF. Advances in porous biomaterials for dental and orthopaedic applications. Materials. 2010:3:2947-74.
[13] Dalla Pria P. New modular system in total hip arthroplasty: the Lima Group’s experience in modularity. J Orthopaed Traumatol. 2004 Apr;5(1):S20–S21.
[14] Karageorgiou V, Kaplan D. Porosity of 3D biomaterial scaffolds and osteogenesis. Biomaterials. 2005;26(27):5474-91.
[15] Frosch KH, Barvencik F, Viereck V, Lohmann CH, Dresing K, Breme J, Brunner E, Stürmer KM. Growth behavior, matrix production, and gene expression of human osteoblasts in defi ned cylindrical titanium channels. J Biomed Mater Res A. 2004;68(2):325-34
[16] Gastaldi G, Asti A, Scaffi no MF, Visai L, Saino E, Cometa AM, Benazzo F. Human adipose-derived stem cells (hASCs) proliferate and differentiate in osteoblast-like cells on trabecular titanium scaffolds. J Biomed Mater Res A. 2010;94(3):790-9.
[17] Benazzo F, Botta L, Scaffi no MF, Caliogna L, Marullo M, Fusi S, Gastaldi G. Trabecular Titanium can induce in vitro osteogenic differentiation of human adipose derived stem cells without osteogenic factors. J Biomed Mater Res Part A. 2014:102A:2061–71.
[18] Devine D, Arens D, Burelli S, Bloch HR, Boure L. In vivo evaluation of the osteointegration of new highly porous Trabecular Titanium™. J Bone Joint Surg Br. 2012;94-B(Suppl XXXVII):201.
[19] Biggi S, Gramazio M, Tornago S, Cattaneo G, Camera A. Trabecular titanium acetabular cup with ceramic-on-ceramic bearing in primary total hip arthroplasty. A ten-years single center study. Giornale Italiano di Ortopedia e Traumatologia 2017;43:138-43. [Italian]Giornale Italiano di Ortopedia e Traumatologia 2017;43:138-43. [Italian] Trabecular Titanium™. J Bone Joint Surg Br. 2012;94-B(Suppl XXXVII):201.
[1] Ashby MF, Evans A., Fleck NA, Gibson LJ, Hutchinson JW, Wadley HNG. Metal foams: a design guide. Woburn (MA, USA): Butterworth-Heinemann; 2000.
[2] Bistolfi A, Ravera L, Graziano E, Collo G, Malino D, Giordano A, Massazza G. A Trabecular Titanium™ cup for total hip arthroplasty: a preliminary clinical and radiographic report. Minerva Ortop Traumatol. 2014 Apr;65(2):199-205.
[3] Massari L, Bistolfi A, Grillo PP, Borré A, Gigliofiorito G, Pari C, Francescotto A, Tosco P, Deledda D, Ravera L, Causero A. Periacetabular Bone Densitometry After Total Hip Arthroplasty with Highly Porous Titanium Cups: A Two-Year Follow-Up
Prospective Study. Hip Int. 2017;27(6):551-7.
[4] Perticarini L, Zanon G, Rossi SM, Benazzo FM. Clinical and radiographic outcomes of a trabecular titanium™ acetabular component in hip arthroplasty: results at minimum 5 years follow-up. BMC Musculoskelet Disord. 2015 Dec 3;16:375.
[5] Shultz TR, Blaha JD, Gruen TA, Norman TL. Cortical bone viscoelasticity and fixation strength of press-fit femoral stems: finite element model.J Biomech Eng. 2006;128(1):7-12.
[6] Medlin DJ, Scrafton J, Shetty R. Metallurgical attachment of a porous tantalum foam to a titanium substrate for orthopaedic applications. Journal of ASTM International. 2005;2(10):30-9.
[7] Marin E, Fusi S, Pressacco M, Paussa L, Fedrizzi L. Characterization of cellular solids in Ti6Al4V for orthopaedic implant applications: Trabecular titanium. J Mech Behav Biomed Mater. 2010;3(5):373–81.
[8] Ding M, Dalastra M, Danielsen CC, Kabel J, Hvid I, Linde F. Age variations in the properties of human tibial trabecular bone. J Bone Joint Surg Br. 1997;79-B(6):995-1002.
[9] William D. Callister Jr. Materials Science and Engineering an introduction. 6th Edition. Hoboken (NJ, USA): Wiley; 2002.
[10] MatWeb. Material Property Data [Internet]. Blacksburg (VA, USA): MatWeb LLC; [cited 2014 May 14th]. Available from: www.matweb.com.
[11] Marin E, Fedrizzi L, Regis M, Pressacco M, Zagra L, Fusi S. Stability Enhancement Of Prosthetic Implants: Friction Analysis Of Trabecular Titanium. Hip Int. 2012;403:427-428.
[12] Mour M, Das D, Winkler T, Hoenig E, Mielke G, Morlock MM, Schilling AF. Advances in porous biomaterials for dental and orthopaedic applications. Materials. 2010:3:2947-74.
[13] Dalla Pria P. New modular system in total hip arthroplasty: the Lima Group’s experience in modularity. J Orthopaed Traumatol. 2004 Apr;5(1):S20–S21.
[14] Karageorgiou V, Kaplan D. Porosity of 3D biomaterial scaffolds and osteogenesis. Biomaterials. 2005;26(27):5474-91.
[15] Frosch KH, Barvencik F, Viereck V, Lohmann CH, Dresing K, Breme J, Brunner E, Stürmer KM. Growth behavior, matrix production, and gene expression of human osteoblasts in defi ned cylindrical titanium channels. J Biomed Mater Res A. 2004;68(2):325-34
[16] Gastaldi G, Asti A, Scaffi no MF, Visai L, Saino E, Cometa AM, Benazzo F. Human adipose-derived stem cells (hASCs) proliferate and differentiate in osteoblast-like cells on trabecular titanium scaffolds. J Biomed Mater Res A. 2010;94(3):790-9.
[17] Benazzo F, Botta L, Scaffi no MF, Caliogna L, Marullo M, Fusi S, Gastaldi G. Trabecular Titanium can induce in vitro osteogenic differentiation of human adipose derived stem cells without osteogenic factors. J Biomed Mater Res Part A. 2014:102A:2061–71.
[18] Devine D, Arens D, Burelli S, Bloch HR, Boure L. In vivo evaluation of the osteointegration of new highly porous Trabecular Titanium™. J Bone Joint Surg Br. 2012;94-B(Suppl XXXVII):201.
[19] Biggi S, Gramazio M, Tornago S, Cattaneo G, Camera A. Trabecular titanium acetabular cup with ceramic-on-ceramic bearing in primary total hip arthroplasty. A ten-years single center study. Giornale Italiano di Ortopedia e Traumatologia 2017;43:138-43. [Italian]Giornale Italiano di Ortopedia e Traumatologia 2017;43:138-43. [Italian] Trabecular Titanium™. J Bone Joint Surg Br. 2012;94-B(Suppl XXXVII):201.
Dimensioni
& Opzioni
Papers
Risorse
Disclaimer
Non tutti i prodotti sono disponibili e registrati in tutti i mercati. Per maggiori informazioni contatti il suo Rappresentante LimaCorporate locale.
LPSI and SpaceFlex e SYMBOL® sono distribuiti da Limacorporate S.p.A.
BIOLOX® / BIOLOX®delta / BIOLOX OPTION® sono marchi registrati di un'azienda del Gruppo CeramTec, Germania.
LPSI and SpaceFlex e SYMBOL® sono distribuiti da Limacorporate S.p.A.
BIOLOX® / BIOLOX®delta / BIOLOX OPTION® sono marchi registrati di un'azienda del Gruppo CeramTec, Germania.