C2
The LimaCorporate C2 Uncemented Stem for hip represents a primary femoral stem following the Zweymuller philosophy.
Please note that not all products are available and registered in every market: contact your LimaCorporate Sales Representative for any further information.
Benefits
01
Designed following Zweymueller style
02
Designed to improve implant stability
03
C2 Uncemented Stems aim to maximise long term results[1]
Images
About
LimaCorporate’s C2 Uncemented stem is a Zweymuller style stem optimized for primary cases.
The C2 product is part of LimaCorporate’s heritage and has been on the market since 1996. It is indicated for orthopedic cases where strong cortical contact is preferred, as the axial profile represents an optimized thickness to prevent subsidence. [Long term implant stability is supported by the stem’s textured proximal aspect. The dual taper implant design promotes axial stability and fit with the most common femoral anatomies. Rotational stability of the stem in flexion/extension is achieved by a rectangular cross section and sharp edges leading to cortical fixation. This prevents thigh pain [1].
Its unique design provides tapered neck geometry for enhanced range of motion. The rounded calcar region allows an even load distribution, and the distal cross section is tapered and rounded helping to prevent thigh pain and stress shielding [1].
The C2 stem is supported by many years of clinical heritage and remains one of Lima Corporate’s most successful femoral stems. Orthopedic surgeons choose it for its unrivalled reliability and simplicity [3, 5, 6, 7]. The R.I.P.O registry confirms a 99% survival rate at 10 years. [3,4]
See bibliography
BIBLIOGRAPHY
1] Affatato S, Comitini S, Fosco M, Toni A, Tigani D. Radiological identification of Zweymüller-type femoral stem prosthesis in revision cases. Int Orthop. 2016 Feb 29. [Epub ahead of print]
[2] Park YS, Park SJ, Lim SJ. Ten-year results after cementless THA with a sandwich-type alumina ceramic bearing. Orthopedics. 2010 Nov;33(11):796.
[3] Schwartz Z., Raz P., Zhao G., Barak Y., Tauber M., Yao H., Boyan B. D. Effect of Micrometer-Scale Roughness of the Surface of Ti6Al4V Pedicle Screws in Vitro and in Vivo.
J Bone Joint Surg [AM], 90: 2485-2498, 2008
[4] Collection and Statistical Analysis of data on Stem Implant C2 – LimaCorporate. Bologna (Italy): Registro dell’Implantologia Protesica Ortopedica (R.I.P.O.), Istituto Ortopedico Rizzoli; 2015 June 25th. Report N° OCORRIPO/6-2015.
[5] Haverkamp D, Westerbos S, Campo MM, Boonstra RH, Rob Albers GH, van der Vis HM. Early loosening of a press-fit cup with ceramic-onceramic articulation: our early results.
Arch Orthop Trauma Surg. 2013 Dec;133(12):1757-62.
[6] Kang BJ, Ha YC, Hwang SC, Lee YK, Koo KH. Midterm Results of Large Diameter Biolox Forte Ceramic Head on Delta Ceramic Liner Articulation in Total Hip Arthroplasty. J Arthroplasty. 2014;29(12):2412-4.
[7] Park MS, Cho HM, Kim JH, Shin WJ. Cementless bipolar hemiarthroplasty using a rectangular cross-section stem for unstable intertrochanteric fractures. Hip Int. 2013 Jun 4;3(23):316-22.
1] Affatato S, Comitini S, Fosco M, Toni A, Tigani D. Radiological identification of Zweymüller-type femoral stem prosthesis in revision cases. Int Orthop. 2016 Feb 29. [Epub ahead of print]
[2] Park YS, Park SJ, Lim SJ. Ten-year results after cementless THA with a sandwich-type alumina ceramic bearing. Orthopedics. 2010 Nov;33(11):796.
[3] Schwartz Z., Raz P., Zhao G., Barak Y., Tauber M., Yao H., Boyan B. D. Effect of Micrometer-Scale Roughness of the Surface of Ti6Al4V Pedicle Screws in Vitro and in Vivo.
J Bone Joint Surg [AM], 90: 2485-2498, 2008
[4] Collection and Statistical Analysis of data on Stem Implant C2 – LimaCorporate. Bologna (Italy): Registro dell’Implantologia Protesica Ortopedica (R.I.P.O.), Istituto Ortopedico Rizzoli; 2015 June 25th. Report N° OCORRIPO/6-2015.
[5] Haverkamp D, Westerbos S, Campo MM, Boonstra RH, Rob Albers GH, van der Vis HM. Early loosening of a press-fit cup with ceramic-onceramic articulation: our early results.
Arch Orthop Trauma Surg. 2013 Dec;133(12):1757-62.
[6] Kang BJ, Ha YC, Hwang SC, Lee YK, Koo KH. Midterm Results of Large Diameter Biolox Forte Ceramic Head on Delta Ceramic Liner Articulation in Total Hip Arthroplasty. J Arthroplasty. 2014;29(12):2412-4.
[7] Park MS, Cho HM, Kim JH, Shin WJ. Cementless bipolar hemiarthroplasty using a rectangular cross-section stem for unstable intertrochanteric fractures. Hip Int. 2013 Jun 4;3(23):316-22.
Sizing
& Options
Ti6Al4V Sizes 01 to 12
Std offset 131°
Lateralized offset 124°
Papers
Resources
Related Products
Acetabular Cups / DELTA System Primary
DELTA TT
The LimaCorporate DELTA TT is a hemispherical cementless acetabular cup manufactured in Trabecular Titanium through the process of additive manufacturing. Breaking new ground in orthopedic technology, it combines the unique features of the DELTA System with the Trabecular Titanium structure.
Disclaimer
Please note that not all products are available and registered in every market. Please contact your LimaCorporate Sales Representative for any further information.
LPSI, SpaceFlex e SYMBOL® are distributed by Limacorporate S.p.A.
BIOLOX® / BIOLOX®delta / BIOLOX OPTION® is a registered trademark of a company of the CeramTec Group, Germany.
LPSI, SpaceFlex e SYMBOL® are distributed by Limacorporate S.p.A.
BIOLOX® / BIOLOX®delta / BIOLOX OPTION® is a registered trademark of a company of the CeramTec Group, Germany.